Multi-station tribometer
- TE85 8-Station Orbital Tooth Brushing Rig
- TE87 50 or 100-station Pin on Disc Machine
- HTP010 2 or 4-Station Short Stroke Reciprocating Tribometer
- HTP030 3-Station Four Ball Tester
- HTP050 3-Station Sand-wheel Abrasion
- HTP070 3-Station Block on Ring Tribometer
- HTP090 3-Station Ball Cratering/Microscale Abrasion Tribometer
- TE 86 6 or 12-station Hip Joint Simulator
- TE101 6-Station Journal Bearing Tribometer
- HTP020 3-Station Thrust Washer Tribometer
- HTP040 6-Station Cross Cylinder/Block on Ring Tribometer
- HTP060 3-Station Pin on Disc Tribometer
- HTP080 12-Station Reciprocating Tester
- HTP100 3-Station High Temperature Pin on Disc Tribometer
50 years in tribology!
European quality and innovation!
Your complete solution provider!
High Throughput Tribometers - Multi Station Solution
Can we do 100 tests per day on the same piece of equipment?For industry, testing time is seen in money terms: we need quick results, with dedicated units, which can easily be operated by an ordinary worker and not require ‘scientists’.”
Yes, we can! AMT supplies more than 10 models multi-station, low cost, easy to operate tribometers:
- Single function
- Multi-station
- Simple to Operate
- Control via PLC
- Data exported on USB stick
TE85 8-Station Orbital Tooth Brushing Rig
The TE 85 Eight Station Orbital Tooth Brushing Rig provides circular orbital, elliptical orbital and reciprocating motion, with fixed tooth brush samples loaded against moving teeth samples.
Technical Specifications
- Load per brush: 150 to 500 grams
- Motion x direction: 10 mm (fixed) (+/-5 mm)
- Motion y direction: 0 to 10 mm in 2 mm steps (+/-0, 1, 2, 3, 4, 5 mm)
- Maximum Frequency: 2 Hz (120 rpm)
If you want to have further information or would like to submit a demo test, please contact us.
The TE 86 Multi-station Hip Joint Simulator is simple to operate and a very cost effective solution for multi-station wear testing of prosthetic hip joints. The unit is available with twelve test stations, with a maximum load of 2 kN per test station, or six test stations, with a maximum load of 3 kN per test station.
Technical Specifications
- Test Configuration: Acetabular cup on femoral head
- Number of Test Stations: 6 or 12
- Test Frequency: 1.06 Hz (with 50 Hz supply)
- 1.27 Hz (with 60 Hz supply)
- Maximum Load: 3 kN (6 station) or 2 kN (12 station)
- Minimum Load: 0.4 kN
- Average Load: 1.2 kN
If you want to have further information or would like to submit a demo test, please contact us.
TE87 50 or 100-station Pin on Disc Machine
TE 87 Multi-station Circular Translation Pin on Disc Machine is based on his Super-CTPOD machine design. It is for the evaluation of prosthetic joint materials. This capacity makes it possible to test many different material combinations simultaneously under identical test conditions.
Technical Specifications
- Number of Test Stations: 50 or 100
- Pin Diameter: 9 mm (typical)
- 12.5 mm (maximum)
- Disc Diameter: 28 mm
- Fluid Sample: 16 ml
- Amplitude: 10 mm
- Load: 71 N @ 4.25 bar air pressure
If you want to have further information or would like to submit a demo test, please contact us.
TE101 6-Station Journal Bearing Tribometer
The TE 101 Six Station Journal Bearing Test Machine incorporates 6 test stations, with test rings of 100 mm diameter locked onto a single shaft. The shaft may be continuously rotated or oscillated.
Technical Specifications
- Maximum Bearing Pressure (for all six stations) 120 MN/m2
- Limiting PV Value 10^6 N/m2 . m/s
- Maximum Sliding Speed continuous rotation 10 m/s
- Maximum Sliding Speed oscillation 0.55 m/s
- Minimum Sliding Speed for low loads 5 mm/s or less
- Minimum Size for Test Specimen 25mm x 25mm
If you want to have further information or would like to submit a demo test, please contact us.
HTP010 2 or 4-Station Short Stroke Reciprocating Tribometer
Technical Specifications
- MotionReciprocating
- Load 5 to 100 N
- Stroke 5 mm
- Frequency 3 to 30 Hz
- Temperature Ambient to 200 °C
- Test Stations 2 or 4
If you want to have further information or would like to submit a demo test, please contact us.
HTP020 3-Station Thrust Washer Tribometer
HTP 020 is a development of the TE 94. This machine is designed to run multiple tests in the thrust washer and three pin on disc test configurations, under identical test conditions. Sensors are provided for measurement of friction and sample temperature on each test station.
For more information, refer to Rotary Tribometer.
Technical Specifications
- MotionRotary
- Load 20 to 400 N
- Diameter ASTM D3702 Small mm
- Speed 6 to 600 rpm
- Temperature Ambient to 150 °C
- Test Stations 3
If you want to have further information or would like to submit a demo test, please contact us.
HTP030 3-Station Four Ball Tester
HTP 030 Three Station Four Ball Friction & Wear High Throughput Tribometer is a development of the TE 94. This machine is designed to run multiple sliding four ball friction and wear tests, under identical test conditions. Sensors are provided for measurement of friction and sample temperature on each test station.
For more information, refer to Four ball Tribometer.
Technical Specifications
- MotionRotary
- Load 50 to 1200 N
- Diameter 12.7 mm
- Speed 6 to 1200 rpm
- Temperature Ambient to 150 °C
- Test Stations 3
If you want to have further information or would like to submit a demo test, please contact us.
HTP040 6-Station Cross Cylinder/Block on Ring Tribometer
HTP 040 Six Station Cross Cylinder/Block on Ring High Throughput Tribometer is a development of an earlier machine, which use a standard lathe as the basic platform.
Technical Specifications
- MotionRotary
- Load 20 to 400 N
- Diameter 20 mm
- Speed 6 to 600 rpm
- Temperature Ambient °C
- Test Stations 6
If you want to have further information or would like to submit a demo test, please contact us.
HTP050 3-Station Sand-wheel Abrasion
HTP 050 Three Station Sand-wheel Abrasion -Dry & Wet Throughput Tribometer is a development of the TE 65 Sand/Wheel Abrasion Tester.The machine is designed to be bench-mounted, with installation footprint kept to a minimum.
For more information, refer to TE65.
Technical Specifications
- MotionRotary
- Load 5 to 100 N
- Diameter 80 mm
- Speed 30 to 150 rpm
- Temperature Ambient °C
- Test Stations 3
If you want to have further information or would like to submit a demo test, please contact us.
HTP060 3-Station Pin on Disc Tribometer
HTP 060 Three Station Pin on Disc High Throughput Tribometer is derived from and is a simplified version of the TE 79 Multi-Axis Tribology Machine.The unit incorporates three conventional pin on disc test assemblies, generally in compliance with ASTM G99.
For more information, refer to Rotary tribometer.
Technical Specifications
- MotionRotary
- Load 1 to 60 N
- Diameter 75 mm
- Speed 2 to 200 rpm
- Temperature Ambient to 150 °C
- Test Stations 3
If you want to have further information or would like to submit a demo test, please contact us.
HTP070 3-Station Block on Ring Tribometer
HTP 070 Three Station Block on Ring Friction High Throughput Tribometer is an updated version of the TE 56 Multi Station Block on Ring Machine.This wear and friction test machine uses simple test specimens offering conforming and non-conforming block-on-ring contact geometry. The machine meets and exceeds the requirements of ASTM G137.
For more information, see TE56.
Technical Specifications
- MotionRotary
- Load 5 to 150 N
- Diameter 100 mm
- Speed 10 to 380 rpm
- Temperature Ambient °C
- Test Stations 3
If you want to have further information or would like to submit a demo test, please contact us.
HTP080 12-Station Reciprocating Tester
HTP 080 Twelve Station Pin on Reciprocating Plate High Throughput Tribometer is a long stroke pin on reciprocating plate machine combining features from two established products, the TE 87 Circular Translation Pin on Disc the TE 88 Multi-station Friction & Wear Tester.
For more information, see TE87 or TE88.
Technical Specifications
- MotionReciprocating
- Load 5 to 100 N
- Stroke 25 mm
- Frequency 1 to 3 Hz
- Temperature Ambient to 150 °C
- Test Stations 12
If you want to have further information or would like to submit a demo test, please contact us.
HTP090 3-Station Ball Cratering/Microscale Abrasion Tribometer
HTP 090 Three Station Ball Cratering/Microscale Abrasion High Throughout Tribometer is a three station version of the standard TE 66 Micro Scale Abrasion Tester, which has been built as both single and multi-station versions, for many years. This instrument represents a rationalistion of the most recent multi-station design.
For more information, see TE66.
Technical Specifications
- MotionRotary
- Load 0.1 to 5 N
- Diameter 25 mm
- Speed 30 to 150 rpm
- Temperature Ambient °C
- Test Stations 3
If you want to have further information or would like to submit a demo test, please contact us.
HTP100 3-Station High Temperature Pin on Disc Tribometer
HTP 100 Three Station High Temperature Pin on Disc High Throughput Tribometer is a development of TE 95. The unit incorporates three conventional pin on disc test assemblies, generally in compliance with ASTM G99. It is designed for running dry pin on disc tests at temperatures from ambient to 500°C. Non-contact heating of the specimens is provided by an electrically heated hot air gun.
For more information, see TE95.
Technical Specifications
- MotionRotary
- Load 1 to 60 N
- Diameter 75 mm
- Speed 2 to 200 rpm
- Temperature Ambient to 500 °C
- Test Stations 3
If you want to have further information or would like to submit a demo test, please contact us.
